2009A&A...503L..17C


Query : 2009A&A...503L..17C

2009A&A...503L..17C - Astronomy and Astrophysics, volume 503, L17-20 (2009/8-4)

Spitzer observations of spacecraft target 162173 (1999 JU3).

CAMPINS H., EMERY J.P., KELLEY M., FERNANDEZ Y., LICANDRO J., DELBO M., BARUCCI A. and DOTTO E.

Abstract (from CDS):

Near-Earth asteroid 162173 (1999 JU3) is the primary target of the Japanese Aerospace Exploration Agency (JAXA) Hayabusa-2 sample return mission, and is also on the list of potential targets for the European Space Agency (ESA) Marco Polo sample return mission. Earth-based studies of this object are fundamental to these missions. Our aim is to provide new constraints on the surface properties of this asteroid. We present a mid-infrared spectrum (5-38µm) obtained with NASA's Spitzer Space Telescope in May 2008 and results from the application of thermal models. These observations place new constraints on the surface properties of this asteroid. To fit our spectrum we used the near-Earth asteroid thermal model (NEATM) and the more complex thermophysical model (TPM). However, the position of the spin-pole, which is uncertain, is a crucial input parameter for constraining the thermal inertia with the TPM; hence, we consider two pole orientations. First is the extreme case of an equatorial retrograde geometry from which we derive a rigorous lower limit to the thermal inertia of 150J/m2/s0.5/K. Second, when we adopt the pole orientation of Abe et al. (2008a, 37th COSPAR Scientific Assembly) our best-fit thermal model yields a value for the thermal inertia of 700±200J/m2/s0.5/K and even higher values are allowed by the uncertainty in the spectral shape due to the absolute flux calibration. Our best estimates of the diameter (0.90±0.14km) and geometric albedo (0.07±0.01) of asteroid 162173 are consistent with values based on previous mid-infrared observations. We establish a rigorous lower limit to the thermal inertia, which is unlikely but possible, and would be consistent with a fine regolith similar to wthat is found for asteroid 433 Eros. However, the thermal inertia is expected to be higher, possibly similar to or greater than that on asteroid 25143 Itokawa. An Accurately determining the spin-pole of asteroid 162173 will narrow the range of possible values for its thermal inertia.

Abstract Copyright:

Journal keyword(s): minor planets, asteroids - infrared: solar system - space vehicles

Simbad objects: 1

goto Full paper

goto View the references in ADS

Number of rows : 1
N Identifier Otype ICRS (J2000)
RA
ICRS (J2000)
DEC
Mag U Mag B Mag V Mag R Mag I Sp type #ref
1850 - 2024
#notes
1 NAME SEP reg 06 00 00.000 -66 33 38.55           ~ 173 0

Query : 2009A&A...503L..17C

Basic data :
NAME SEP -- Region defined in the Sky
Origin of the objects types :

(Ref) Object type as listed in the reference "Ref"
(acronym) Object type linked to the acronym according to the original reference
() Anterior to 2007, before we can link the objet type to a reference, or given by the CDS team in some particular cases

Other object types:
reg ()
Syntax of coordinates is : "ra dec (wtype) [error ellipse] quality bibcode" :
  • ra dec : right ascension and declination (unit and frame defined according to your Output Options)
    Grey values are increasing the original precision due to the computation of frame transformations
  • (wtype) : wavelength class for the origin of the coordinates (Rad, mm, IR, Optical, UV, Xray, Gam)
  • [error ellipse] : measurement uncertainty, on (ra,dec) if the positional angle is 90 degrees, on (majaxis,minaxis) otherwise (in mas at defined epoch in the original catalogue),
    position angle (in degrees North celestial pole to East)
  • quality : flag of quality
    • E ≥ 10"
    • D : 1-10" (and some old data)
    • C : 0.1-1"
    • B : 0.01-0.1" + 2MASS, Tyc
    • A : VLBI, Hipparcos
  • bibcode : bibcode of the coordinates reference
ICRS coord. (ep=J2000) :
06 00 00.000 -66 33 38.55 [ ] D ~
Syntax of coordinates is : "ra dec (wtype) [error ellipse] quality bibcode" :
  • ra dec : right ascension and declination (unit and frame defined according to your Output Options)
    Grey values are increasing the original precision due to the computation of frame transformations
  • (wtype) : wavelength class for the origin of the coordinates (Rad, mm, IR, Optical, UV, Xray, Gam)
  • [error ellipse] : measurement uncertainty, on (ra,dec) if the positional angle is 90 degrees, on (majaxis,minaxis) otherwise (in mas at defined epoch in the original catalogue),
    position angle (in degrees North celestial pole to East)
  • quality : flag of quality
    • E ≥ 10"
    • D : 1-10" (and some old data)
    • C : 0.1-1"
    • B : 0.01-0.1" + 2MASS, Tyc
    • A : VLBI, Hipparcos
  • bibcode : bibcode of the coordinates reference
FK4 coord. (ep=B1950 eq=1950) :
06 00 00.413 -66 33 38.63 [ ]
Syntax of coordinates is : "ra dec (wtype) [error ellipse] quality bibcode" :
  • ra dec : right ascension and declination (unit and frame defined according to your Output Options)
    Grey values are increasing the original precision due to the computation of frame transformations
  • (wtype) : wavelength class for the origin of the coordinates (Rad, mm, IR, Optical, UV, Xray, Gam)
  • [error ellipse] : measurement uncertainty, on (ra,dec) if the positional angle is 90 degrees, on (majaxis,minaxis) otherwise (in mas at defined epoch in the original catalogue),
    position angle (in degrees North celestial pole to East)
  • quality : flag of quality
    • E ≥ 10"
    • D : 1-10" (and some old data)
    • C : 0.1-1"
    • B : 0.01-0.1" + 2MASS, Tyc
    • A : VLBI, Hipparcos
  • bibcode : bibcode of the coordinates reference
Gal coord. (ep=J2000) :
276.383977 -29.811440 [ ]
SIMBAD within arcmin
', {sourceSize:12, color:'#30a090'})); aladin.on('objectClicked', function(object) { var objName=object.data.MAIN_ID; aladin.showPopup(object.ra,object.dec,'',''+ objName+''); });" title="Show Simbad objects"> Overlay Simbad points in this preview
Back
All CDSPortal (CDSPortal)

Send to sendBySAMP sendBySAMP

sedIcon
within arcsec The VizieR photometry tool allows for easy visualization of photometry points extracted around the Simbad position from photometry-enabled catalogues in VizieR.
The search radius has to be specified by the user. It is currently limited to a maximum of 30 arcsec. It depends mostly on the precision or quality of the coordinates (SIMBAD and VizieR catalogs), the resolution of the images from which the sources were extracted, source extent, and source crowding.
Suggestions are: crowded field: 0.5 to 1.5 arcsec, 3 arcsec otherwise; uncertain coordinates (SIMBAD quality E or coordinates without reference): 5 to 30 arsec (risky!).
sed-help-icon

The link on the acronym of the identifiers give access to the information for this acronym in the dictionary of nomenclature.
Identifiers (3) :
An access of full data is available using the icon Vizier near the identifier of the catalogue

NAME SEP NAME South Ecliptic Pole NAME Southern Ecliptic Pole

References (173 between 1850 and 2024) (Total 173)
Simbad bibliographic survey began in 1850 for stars (at least bright stars) and in 1983 for all other objects (outside the solar system).
Follow new references on this object
                Reference summaries :

                from: to:

                 or select by : (not exhaustive, explanation here)


Observing logs


ISO : 10    XMM : 3   

   


External archives :

Search by coordinates in Vizier (radius: 5 arcsec)


Annotations :
Annotations allow a user to add a note or report an error concerning the astronomical object and its data. It requires registration to post a note. See description .
Please, have a look at Best practices. The list of all annotations to SIMBAD objects can be found here .

Currently no annotations available

add an annotation to this object

report an error concerning the data of this object


To bookmark this query, right click on this link: simbad:objects in 2009A&A...503L..17C and select 'bookmark this link' or equivalent in the popup menu